![]() |
PRODUCT LINE |
CHEMTROL® offers the largest selection of controllers for automated water treatment in pools, spas and industrial applications.
All controllers feature the most advanced and reliable electronic technology with over 20,000 units installed worldwide since 1976.
PC PROGRAMMABLE CONTROLLERS
CHEMTROL® PC7000
INTEGRATED CONTROLLER
with FREE CHLORINE SENSOR
- Chemical Automation with ORP, Free Chlorine and pH sensors,
- Temperature display and programmable heater control,
- TDS and Conductivity control with programs for dump valve and three(3)chemical additives,
- Water balance with Langelier Saturation Index,
- Fully instrumented bypass line assembly with see-through sensor cell,
- Pump control with instant and cumulative flow displays,
- Filter control with influent and effluent pressure displays, programmable backwash cycles,
- Remote computer operation with true duplex Windows software,
- Voice telephone communications and control by touch-tone phone.
OPTION ETHCOM7: Full duplex remote computer operation with ethernet / internet modem.
OPTION RS485: Full duplex direct computer operation with data converter.
OPTION 420M: 4-20mA signal (5-channels) for monitoring display outputs.
OPTION MODBUS6: Modbus-protocol communication for Building Management Systems.![]()
CHEMTROL® PC6000
INTEGRATED CONTROLLER
- Chemical Automation with ORP and pH sensors,
- Temperature display and programmable heater control,
- TDS and Conductivity control with programs for dump valve and three(3)chemical additives,
- Water balance with Langelier Saturation Index,
- Fully instrumented bypass line assembly with see-through sensor cell,
- Pump control with instant and cumulative flow displays,
- Filter control with influent and effluent pressure displays, programmable backwash cycles,
- Remote computer operation with true duplex Windows software,
- Voice telephone communications and control by touch-tone phone.
OPTION ETHCOM6: Full duplex remote computer operation with ethernet / internet modem.
OPTION RS485: Full duplex direct computer operation with data converter.
OPTION 420M: 4-20mA signal (5-channels) for monitoring display outputs.
OPTION MODBUS6: Modbus-protocol communication for Building Management Systems.![]()
CHEMTROL® PC5000
PROGRAMMABLE PPM CONTROLLER
- Chemical Automation with ORP and pH sensors,
- Temperature control,
- Bypass line assembly,
- Probe rinse,
- Remote alarm,
- RS-232 communication port.
OPTION TDS3: TDS/Conductivity control with sensor for dump valve or salt chlorine generator.
OPTION FLOW3: Flow monitoring & totalizer with electronic sensor and adjustable alarms.
OPTION LEVEL3: Water level control with electronic sensor and fill valve control.
OPTION PRESS3: Influent and effluent pressure monitoring with sensors and adjustable alarms.
OPTION REM3: Full duplex remote computer operation with data modem.
OPTION TEL3: Telephone voice communications with status reports, alarm callouts and remote operation control.
OPTION ETHCOM3: Full duplex remote computer operation with ethernet / internet modem.
OPTION RS485: Full duplex direct computer operation with data converter.
OPTION MULTI3: Multiplex communication for remote/direct operation through host controller.
OPTION 420M: 4-20mA signal (5-channels) for monitoring display outputs.
OPTION MODBUS3: Modbus-protocol communication for Building Management Systems.![]()
CHEMTROL® PC4000
FILTER CONTROLLER
- Pump control with instant and cumulative flow displays,
- Filter control with influent and effluent pressure displays, programmable backwash cycles,
- Priority valve program
- Heater control with fireman safety and energy saver program
- Interlock with Chemistry controller
- Remote alarm,
- RS-232 communication port.
OPTION LEVEL4: Water level control with electronic sensor and fill valve control.
OPTION REM4: Full duplex remote computer operation with data modem.
OPTION ETHCOM4: Full duplex remote computer operation with ethernet / internet modem.
OPTION RS485: Full duplex direct computer operation with data converter.
OPTION MULTI4: Multiplex communication for remote/direct operation through host controller.
OPTION MODBUS4: Modbus-protocol communication for Building Management Systems.![]()
CHEMTROL® PC3000
PROGRAMMABLE CONTROLLER
- Chemical Automation with ORP and pH sensors,
- Temperature control,
- Bypass line assembly,
- Probe rinse,
- Remote alarm,
- RS-232 communication port.
OPTION TDS3: TDS/Conductivity control with sensor for dump valve or salt chlorine generator.
OPTION FLOW3: Flow monitoring & totalizer with electronic sensor and adjustable alarms.
OPTION LEVEL3: Water level control with electronic sensor and fill valve control.
OPTION PRESS3: Influent and effluent pressure monitoring with sensors and adjustable alarms.
OPTION REM3: Full duplex remote computer operation with data modem.
OPTION TEL3: Telephone voice communications with status reports, alarm callouts and remote operation control.
OPTION ETHCOM3: Full duplex remote computer operation with ethernet / internet modem.
OPTION RS485: Full duplex direct computer operation with data converter.
OPTION MULTI3: Multiplex communication for remote/direct operation through host controller.
OPTION 420M: 4-20mA signal (5-channels) for monitoring display outputs.
OPTION MODBUS3: Modbus-protocol communication for Building Management Systems.![]()
CHEMTROL® PC2000
PROGRAMMABLE CONTROLLER
- Chemical Automation with ORP and pH control,
- Remote alarm,
- RS-232 communication port.
OPTION PPM2: PPM display with adjustable low and high alarms.
OPTION TEMP2: Temperature display and Heater control with temperature sensor
OPTION TDS2: TDS/Conductivity control with sensor for dump valve or salt chlorine generator.
OPTION REM2: Full duplex remote computer operation with data modem.
OPTION ETHCOM2: Full duplex remote computer operation with ethernet / internet modem.
OPTION RS485: Full duplex direct computer operation with data converter.
OPTION MULTI2: Multiplex communication for remote/direct operation through host controller.
OPTION MODBUS2: Modbus-protocol communication for Building Management Systems.![]()
DIGITAL CONTROLLERS
CHEMTROL® CH265
FREE CHLORINE ANALYZER
Solid State Sensor for Free Chlorine,
pH control,
Programmable 4-20 mA Output to PID,
Programmable 4-20 mA Output Control,
Dry Contact Remote Alarm.
![]()
CHEMTROL® CH255
PPM/pH CONTROLLER
Free Chlorine control,
pH control,
Proportional feed,
Overfeed Safety Timers,
Out-of-range alarms.
![]()
CHEMTROL® CH250
ORP/pH CONTROLLER
Sanitizer control,
pH control,
Proportional feed,
Overfeed Safety Timers,
Out-of-range alarms.
![]()
pH control,
Proportional feed,
Overfeed Safety Timer,
Out-of-range alarms.
![]()
CHEMTROL® CH230
ORP CONTROLLER
Sanitizer control,
Proportional feed,
Overfeed Safety Timer,
Out-of-range alarms.
![]()
COOLING TOWER CONTROLLERS
CHEMTROL® CT6000
COOLING TOWER CONTROLLER
- Conductivity control,
- pH control,
- ORP control,
- Temperature display
- 4 chemical feed programs
- Make-up and Bleed watermeter totalizers
- Automatic probe rinse
- Langelier saturation index
- Fully instrumented bypass line assembly with see-through sensor cell,
- Pump control with instant and cumulative flow displays,
- Filter control with influent and effluent pressure displays, programmable backwash cycles,
- Remote computer operation with true duplex Windows software,
- Alarm callout/telephone status reporting
OPTION 420M: 4-20mA signal output for conductivity, pH, ORP and Temperature channels
![]()
CHEMTROL® CT3000
COOLING TOWER CONTROLLER
- Conductivity control,
- Temperature display
- 4 chemical feed programs
- Make-up and Bleed watermeter totalizers
- Automatic probe rinse
- Langelier saturation index
- Automatic data logging & RS-232 serial download
- Remote alarm,
OPTION pHCT: pH monitoring with automatic acid/based control
OPTION ORPCT: ORP monitoring with control for oxidizing biocide.
OPTION COMM: Full duplex remote computer operation with communications modem.
OPTION TELCT: Remote computer operation AND Alarm callout/telephone status reporting
OPTION RS485: Full duplex direct computer operation with data converter
OPTION 420M: 4-20mA signal output for conductivity, pH, ORP and Temperature channels
OPTION LEVCT: Water level control with electronic sensor and fill valve control.
OPTION PSICT: Influent and effluent pressure monitoring with adjustable alarms.
OPTION CORR: Corrosion monitoring with adjustable alarms![]()
CHEMTROL® CT2000
COOLING TOWER CONTROLLER
- Conductivity control,
- Temperature display
- 3 chemical feed programs,
- Langelier saturation index
- Automatic data logging & RS-232 serial download
OPTION pHCT: pH monitoring with automatic acid/based control
OPTION COMM: Full duplex remote computer operation with communications modem.
OPTION RS485: Full duplex direct computer operation with data converter.![]()
CHEMTROL® CT100
COOLING TOWER CONTROLLER
- Conductivity control,
- 3 chemical feed programs,
- Langelier saturation index
- Automatic data logging & RS-232 serial download
OPTION pHCT: pH monitoring with automatic acid/based control
OPTION COMM: Full duplex remote computer operation with communications modem.
OPTION RS485: Full duplex direct computer operation with data converter.![]()
PORTABLE TESTER
PORTAPROBE
DIGITAL TESTER/SIMULATOR
ORP reading and simulation,
pH reading and simulation,
Temperature reading and simulation,
Conductivity reading and simulation.
![]()
SELECTING YOUR CONTROLLER
For expert assistance in selecting the best controller to meet the requirements of your facility, call either Ron Akin or Rick Cummings in our Customer Service Department. Both can be reached at at 800-621-2279 or by email, as shown below.
Ron Akin, Customer Service
ron@sbcontrol.comRick Cummings, Customer Service
rick@sbcontrol.com