![]() |
CHEMTROL® CT2000
|
|
Features Operation Installation Remote Operation Bid Specs Brochure |
|
![]() |
The CHEMTROL® CT2000 is a programmable control system that offers conductivity (or TDS) control, up to three (3) chemical feed programs (for scale/corrosion inhibitors, biocides), optional pH control, and monitoring of water balance with Langelier Saturation index calculation. |
The CHEMTROL® CT2000 controller is a simple but sophisticated programmable controller designed for control of conductivity, pH (option) and chemical additives - such as inhibitors, biocides, dispersants, etc. - in cooling towers, boilers, and other industrial applications. It is easy to install and operate. All menus are displayed on a large four-line LCD graphic display screen with choice of operating language (English, French or Spanish) and units (US or metric). Entries are made on the 16-key keypad on the front panel. Each unit is supplied with a comprehensive 40-page instruction manual with schematics of installation and menu flow charts.All CHEMTROL® controllers are covered by a FIVE-YEAR electronics warranty backed up by our network of factory-trained Qualified Dealers.
The CHEMTROL® CT2000C controller includes the following standard features:
- Conductivity or TDS control with choice of bleed programs.
- Temperature monitoring.
- Automatic calculation of the Langelier Saturation Index (LSI) for water balance.
- Five separate feed programs for up to three (3) chemical additives (inhibitor, biocide, etc.)
- manual
- bleed-and-feed
- bleed-then-feed
- cycle timer
- daily schedule
- "Booster" chemical feed program to schedule a delayed one-time feed event
- Low chemical level alarm (based on accumulated run time of feed outlet)
- Dynamic probe testing with sensor failure warning.
- Differential signal amplification for added stability.
- Choice of 1,2 or 3-point calibration for all sensors.
- Automatic data logging with.RS232 serial download.
Optional features include:
- pH monitoring/control with acid/base control
- Remote computer operation in true duplex mode with graphic display of data under Windows.
Features available on other CHEMTROL® CT controllers include:
- ORP control for oxidizing sanitizer or biocide.
- Automatic probe rinse program to clean sensors.
- Make-up & bleed watermeter totalizers.
- Automatic water level control.
- Influent and effluent pressure monitoring at the heat exchanger.
- Filter control with choice of backwash programs.
The CHEMTROL® CT2000 controller operates like a computer with multi-line screen displays and direct access to all menus and submenus. The front panel keypad is used to move up and down each menu and enter or exit the submenus. All operating functions can be easily modified from the keypad, including sensor calibration, control setpoints, alarm levels and the different feed programs.
With the Remote Operations feature, all facilities can be monitored by remote computer. This allows real-time supervision by management and remote troubleshooting by a CHEMTROL® Qualified Dealer or by the factory support department. The remote operation option makes it possible to control all operating functions from a remote PC computer. NOTE: The voice telephone communications option is available on the CHEMTROL® CT3000 and CHEMTROL® CT6000 Controllers.
BROCHURE FOR PRINTING
Technical brochures are always available free of charge by calling our office. For faster service, you can print good quality customer brochures on your own printer from the following Acrobat file.